Machine cutting torch “DONMET” 365
Designed for: machine parting cutting of hot low-carbon steel rough parts 50-500mm thick in continuous casting.
It has been successfully used at “ElektroStal Ltd.”.
Design features: in-nozzle gas mixing; single-block nozzle; gas consumption adjustment via the gas-cutting machine control panel; water-cooling system.
The cutting torch is compatible with and can work with the gas-mixing nozzles of such trademarks as Ge-Ga and A.L.B.A.
Used gas fuel: natural gas (methane).
TECHNICAL SPECIFICATION
| Cutting thickness nominal, mm | 500 |
| Distance between the cutting torch and the item, mm |
100-400 |
| Nozzle throat cutting channel diameter, mm |
3,2 |
| Inlet pressure cutting oxygen, bar |
10-12 |
| Inlet pressure preheating oxygen , bar |
1,5-2,5 |
| Inlet pressure natural gas (methane), bar |
0,70-1,5 |
| Nominal consumption cutting oxygen, m3/h |
30-45 |
| Nominal consumption preheating oxygen, m3/h |
14-19 |
| Nominal consumption natural gas (methane), m3/h |
19 -20 |
| Casing diameter, mm |
50 |
| Cutting torch head thread |
M32x2 |
| Cutting torch length no more than, mm |
1000 |
| Cutting torch weight no more than, kg |
10,0 |
