BKO-50-4-2DM – increased accuracy of pressure maintenance and resistance to freezing!
The regulator type BKO-50-4-2DM is designed for reduction, adjustment and automatic maintenance of a constant set working pressure of oxygen during gas welding, cutting, soldering, heating.
The regulator is manufactured in accordance with the requirements of TU U 30482268.004-99, DSTU ISO 2503:2015.
Climatic execution of UHL according to GOST 15150-69 for operation in the temperature range from -25° to +50 ºС.
It is allowed to be used for air and inert gases.
| Maximum flow capacity, m³/h | 50,0 |
| Maximum gas pressure at the inlet, MPa (bar) | 20 (200) |
| Maximum working pressure, MPa (bar) | 1,25 (12,5) |
| Connection thread at the inlet | G 3/4 |
| Connection thread at the exit | М16х1,5 |
| Overall dimensions, no more, mm | 150х140х125 |
| Weight, no more, kg | 1,2 |
Reliable! Three levels of protection of the reducing unit.
Security! The body and connection units are made of brass.
Sound notification of safety valve actuation in an emergency situation.
“DONMET” autogenous equipment plant uses MP-50 pressure gauges, accuracy class 2.5. Pressure gauges are entered in the State Register of measuring equipment under No. U3253-12.
Until April 23, 2017, the factory operated an authorized verification unit (certificate No. P 375-2012), which performed the initial verification of pressure gauges.
On January 1, 2016, the new Law of Ukraine “On Metrology and Metrological Activity” entered into force, which provides for the assessment of compliance of legally regulated measuring equipment with the requirements of technical regulations.
Pressure gauges are subject to the Technical Regulation of legally regulated measuring equipment. This regulation provides for assessing the conformity of pressure regulators (No. 43 of the list in Appendix 1 of the technical regulation) according to module B (type approval) and module F (conformity to the approved type).
On May 20, 2018, “DONMET” autogenous equipment plant received a type inspection certificate No. UA.TR.113-0148-18, the validity of which is until May 20, 2028.
After the type check, an assessment of the conformity of the pressure gauges to the approved type was carried out, which is confirmed by the certificate No. UA.TR.113-0148/01F-18 and the mark of conformity applied to the pressure gauge.
