The oxygen pressure regulator BKO-50DM mini is designed to reduce, adjustment and automatic maintain a constant set working pressure of oxygen during gas welding, cutting, soldering, heating.
The pressure regulator is manufactured in accordance with the requirements of DSTU ISO 2503:2015. And it`s intended for operation in the temperature range from -25° to +50 ºС.
It is allowed to be used for air and inert gases.
| Maximum flow, m³/h | 50,0 |
| Maximum inlet pressure, bar | 200 |
| Maximum working pressure, bar | 12,5 |
| Overall dimensions no more, mm | 140х130х100 |
| Weight, not more, kg | 0,78 |
| Inlet thread | G3/4 |
| Outlet thread | – / Dy9 |
Highly reliable! 2 stages of reducing valve protection.
Safe! All working and conjunctive parts made of brass.
Sound notification of safety valve actuation in an emergency situation.
Pressure gauges, which are used in DONMET products, are tested by a state-authorized enterprise that confirms the certificate of compliance with technical regulations (module B), and are checked in batches with the indication of the individual numbers of the pressure gauges, which certify the certificates of compliance (module F) and have the corresponding holograms on the case. © certificate of compliance module F.
After the type check, an assessment of the conformity of the gauges to the approved type was carried out, which is confirmed by the certificate No. UA.TR.113-0148/01F-18 and the mark of conformity applied to the gauge.
On May 20, 2018, the “DONMET” autogenous equipment plant received a type inspection certificate No. UA.TR.113-0148-18, the validity of which is until May 20, 2028.
Gauges are subject to the Technical Regulation of legally regulated measuring equipment. This regulation provides for assessing the conformity of gauges (No. 43 of the list in Appendix 1 of the technical regulation) according to module B (type approval) and module F (conformity to the approved type).
On January 1, 2016, the new Law of Ukraine “On Metrology and Metrological Activity” entered into force, which provides for the assessment of compliance of legally regulated measuring equipment with the requirements of technical regulations.
Until April 23, 2017, the factory operated an authorized verification unit (certificate No. P 375-2012), which performed the initial verification of pressure gauges.
The autogenous equipment plant “DONMET” uses MP-50 pressure gauges, accuracy class 2.5. Gauges are entered in the State Register of measuring equipment under No. U3253-12.
