The PE-01K electric heater is designed for heating the oxygen supplied to the pressure regulators or flow regulators from the cylinder, as well as for heating air and other inert gases.
The electric oxygen heater PE-01K is intended for operation in the temperature range from -30 to +50°С.
| Parameter name | Value |
| Max flow, l/min | 50 |
| Max gas pressure, bar | 200 |
| Operating voltage, V | ~/= 36±10% |
| Nominal power, W | 100 |
| Disconnection heating temperature, °С | 80±10 |
| Insulation resistance at t=250°С, MΩ, no less | 5 |
| Prepare time before the set mode, min, no more | 3 |
| Inlet and outlet threads | G3/4 |
| Cable length, m, not less | 2 |
| Cable output, type | inseparable |
| Overall dimensions, mm, no more than | 125х80 |
| Weight, kg, no more | 0,75 |
The heater is connected to the cylinder valve by the G3/4 thread. The gas enters the labyrinth inside the heater, where it is heated using a heating element. The bimetallic thermal sensor disconnects the heating element when the body temperature reaches 80±10°С. The heated gas enters the outlet of the heater with the G3/4 thread. The heater is connected to a 36V ±10% AC or DC power supply using a 2m power cable.
