Liquid-fuel cutting torch DONMET «Vognik»181 is designed for hand oxy-gas parting cutting of low-carbon steel.
The cutting torch basic parameters conform with ISO 5172.
Used gas fuel is diesel fuel.
TECHNICAL SPECIFICATIONS
| Сutting thickness, mm | 3 – 8 | 8 -15 | 15-30 | 30 – 50 | 50 – 100 | 100– 200 | 200-300 | ||
| Cutting nozzle No. | 0К | 1К | 2К | 3К | 4К | 5К | 6К | ||
| Preheating nozzle No. | 1D | 2D | |||||||
| Inlet pressure | oxygen | MPa (bar) |
0,25
(2,5) |
0,35
(3,5) |
0,4
(4,0) |
0,42
(4,2) |
0,5
(5,0) |
0,65
(6,5) |
0,9
(9,0) |
| Diesel fuel (diesel oil) | MPa (bar) |
0,05 – 0,15 (0,5 – 1,5) | 0,1 -0,2 (1,0 – 2,0) | ||||||
| Consumption | oxygen | м³/h | 3,1 | 3,4 | 5 | 6,8 | 9,5 | 18 | 30 |
| Diesel fuel (diesel oil) | m³/h
kg/h |
0,54
(0,68) |
0,74
(0,93) |
0,76
(0,95) |
1,0
(1,25) |
1,38 (1,725) | 1,46 (1,83) | ||
| *Weight, kg | 0,96 / 1,2 | ||||||||
| *Length, mm | 550 / 1050 | ||||||||
| Oxygen inlet thread (hose) | М16х1,5 | ||||||||
| Gas fuel inlet thread (hose) | М14х1,5 | ||||||||
Liquid-fuel cutting torch DONMET 181 Diesel
| ITEM | SKU |
| Cutting nozzle № 0К / 0Д | 181.001.15 / 181.001.22 |
| Cutting nozzle № 1К / 1Д | 181.001.16 / 181.001.23 |
| Cutting nozzle № 2К / 2Д | 181.001.17 / 181.001.24 |
| Cutting nozzle № 3К / 3Д | 181.001.18 / 181.001.25 |
| Cutting nozzle № 4К / 4Д | 181.001.19 / 181.001.26 |
| Cutting nozzle № 5К / 5Д | 181.001.20 / 181.001.27 |
| Cutting nozzle № 6К / 6Д | 181.001.21 / 181.001.28 |
| Preheating nozzle № 1К / 1Д | 181.500.00 / 181.500.02 |
| Preheating nozzle № 2К / 2Д | 181.500.01 / 181.500.03 |
